H3C S3100 Series Command Manual

Also see for S3100 Series: Configuration Command manual Operation manual Installation manual Command manual

Contents

H3C S3100 Series Command Manual Manual pdf 3 page image

Command Manual (For Soliton) – Stack-ClusterH3C S3100 Series Ethernet SwitchesChapter 1 Stack Function ConfigurationCommands1-1Chapter 1 Stack Function ConfigurationCommands1.1 Stack Function Configuration Commands1.1.1 display stackingSyntaxdisplay stacking [ members ]ViewAny viewParametermembers: Displays the information about the members of a stack. Do not specify thiskeyword when you execute this command on a slave switch.DescriptionUse the display stacking command to display the information about the main switch orthe slave switches of a stack.When you execute this command on a main switch, the information displayed dependson the members keyword as follows:z If the members keyword is not specified, the output information indicates that thelocal switch is the main switch. Besides, the number of the switches contained inthe stack is also displayed.z If the members keyword is specified, the information about the members of thestack is displayed, including the stack numbers of the main/slave switches, stackname, stack device name, MAC address and status.When you execute this command on a slave switch, the information displayed indicatesthat the local switch is a slave switch. Besides, the information such as the stacknumber of the local switch, and the MAC address of the main switch in the stack is alsodisplayed.Example# Display the information about a stack on the main switch.display stackingMain device for stack.Total members:3