31Information center configuration commandsdisplay channelSyntaxdisplay channel [ channel-number | channel-name ] [ | { begin | exclude | include } regular-expression ]ViewAny viewDefault level1: Monitor levelParameterschannel-number: Displays information about the channel with a specified number, wherechannel-number represents the channel number, which ranges from 0 to 9.channel-name: Displays information about the channel with a specified name, where channel-namerepresents the channel name, which could be a default name or a self-defined name. The user needs tospecify a channel name first before using it as a self-defined channel name. For more information, see theinfo-center channel name command.Table 7 Information channels for different output destinationsOutput destination Information channel number Default channel nameConsole 0 consoleMonitor terminal 1 monitorLog host 2 loghostTrap buffer 3 trapbufferLog buffer 4 logbufferSNMP module 5 snmpagentWeb interface 6 channel6Log file 9 channel9|: Filters command output by specifying a regular expression. For more information about regularexpressions, see Fundamentals Configuration Guide.begin: Displays the first line that matches the specified regular expression and all lines that follow.exclude: Displays all lines that do not match the specified regular expression.include: Displays all lines that match the specified regular expression.regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.DescriptionUse the display channel command to display channel information.If no channel is specified, information for all channels is displayed.
