32Examples# Display information for channel 0. display channel 0channel number:0, channel name:consoleMODU_ID NAME ENABLE LOG_LEVEL ENABLE TRAP_LEVEL ENABLE DEBUG_LEVELffff0000 default Y informational Y debugging Y debuggingThe above information indicates to output log information with a severity from 0 to 4, trap informationwith a severity from 0 to 7 and debugging information with a severity from 0 to 7 to the console. Theinformation source modules are all modules (default).Table 8 Output descriptionField Descriptionchannel number A specified channel number, in the range of 0 to 9.channel name A specified channel name, which varies with user’s configuration. Formore information, see the info-center channel name command.MODU_ID The ID of the module to which the information permitted to pass throughthe current channel belongsNAMEThe name of the module to which the information permitted to passthrough the current channel belongsDefault means all modules are allowed to output system information, butthe module type varies with devices.ENABLE Indicates whether to enable or disable the output of log information,which could be Y or N.LOG_LEVEL The severity of log information, see Table 10 for details.ENABLE Indicates whether to enable or disable the output of trap information,which could be Y or N.TRAP_LEVEL The severity of trap information, see Table 10 for details.ENABLE Indicates whether to enable or disable the output of debugginginformation, which could be Y or N.DEBUG_LEVEL The severity of debugging information, see Table 10 for details.display info-centerSyntaxdisplay info-center [ | { begin | exclude | include } regular-expression ]ViewAny viewDefault level1: Monitor levelParameters|: Filters command output by specifying a regular expression. For more information about regularexpressions, see Fundamentals Configuration Guide.
