43Parameterschannel-number: Specifies a channel number, which ranges from 0 to 9.channel-name: Specifies a channel name, a string of 1 to 30 characters. It must be a combination ofletters and numbers, and start with a letter. It is case-insensitive.DescriptionUse the info-center channel name command to name a channel with a specified channel number.Use the undo info-center channel command to restore the default name for a channel with a specifiedchannel number.See Table 7 for details of default channel names and channel numbers.Examples# Name channel 0 as abc. system-view[Sysname] info-center channel 0 name abcinfo-center console channelSyntaxinfo-center console channel { channel-number | channel-name }undo info-center console channelViewSystem viewDefault level2: System levelParameterschannel-number: Specifies a channel number, which ranges from 0 to 9.channel-name: Specifies a channel name, which could be a default name or a self-defined name. Theuser needs to specify a channel name first before using it as a self-defined channel name. For moreinformation, see the info-center channel name command.DescriptionUse the info-center console channel command to specify the channel to output system information to theconsole.Use the undo info-center console channel command to restore the default output channel to the console.By default, output of information to the console is enabled with channel 0 as the default channel (knownas console).Note that the info-center console channel command takes effect only after the information center isenabled first with the info-center enable command.Examples# Set channel 0 to output system information to the console. system-view[Sysname] info-center console channel 0
