65DescriptionUse the terminal logging command to enable the display of log information on the current terminal.Use the undo terminal logging command to disable the display of log information on the currentterminal.By default, the display of log information on the current terminal is disabled.Note that:• To display the log information, you need to execute the terminal monitor and terminal loggingcommands, and then enable information center (enabled by default).• The configuration of this command is valid for only the current connection between the terminal andthe device. If a new connection is established, the display of log information on the terminal restoresthe default.Examples# Disable the display of log information on the current terminal. undo terminal loggingInfo: Current terminal logging is off.terminal monitorSyntaxterminal monitorundo terminal monitorViewUser viewDefault level1: Monitor levelParametersNoneDescriptionUse the terminal monitor command to enable the monitoring of system information on the currentterminal.Use the undo terminal monitor command to disable the monitoring of system information on the currentterminal.By default, monitoring of the system information on the console is enabled and that on the monitorterminal is disabled.Note that:• You need to configure the terminal monitor command before you can display the log, trap, anddebugging information.• Configuration of the undo terminal monitor command automatically disables the monitoring of log,trap, and debugging information.• The configuration of this command is valid for only the current connection between the terminal andthe device. If a new connection is established, the monitoring of system information on the terminalrestores the default.
