H3C S5500-HI Series Command Reference Manual

Also see for S5500-HI Switch Series: Mpls configuration guide Installation guide Fundamentals configuration guide Quick Start Installation Fundamentals configuration guide

Contents

H3C S5500-HI Series Command Reference Manual Manual pdf 57 page image

44info-center enableSyntaxinfo-center enableundo info-center enableViewSystem viewDefault level2: System levelParametersNoneDescriptionUse the info-center enable command to enable the information center.Use the undo info-center enable command to disable the information center.The system outputs information to the log host or the console only after the information center is enabledfirst.By default, the information center is enabled.Examples# Enable the information center. system-view[Sysname] info-center enableInfo: Information center is enabled.info-center format unicomSyntaxinfo-center format unicomundo info-center formatViewSystem viewDefault level2: System levelParametersNoneDescriptionUse the info-center format unicom command to set the format of the system information sent to a log hostto UNICOM.Use the undo info-center format command to restore the default.By default, the format of the system information sent to a log host is H3C.