H3C S9500E Series Command Reference Manual

Also see for S9500E Series: Card Manual Command reference Configuration guide Quick start guide Security configuration guide

Contents

H3C S9500E Series Command Reference Manual Manual pdf 109 page image

99Default level2: System levelParametersinterval: Specifies the packet statistics collection interval in the range of 5 to 300 and in steps of 5, inseconds.DescriptionUse flow-interval to configure the packet statistics collection interval.Use undo flow-interval to restore the default.Examples# Configure the packet statistics collection interval as 100 seconds for RPR physical port RPRPOS2/1/1. system-view[Sysname] interface rprpos 2/1/1[Sysname-RPRPOS2/1/1] flow-interval 100# Configure the packet statistics collection interval as 100 seconds for RPR physical port RPRXGE3/1/1. system-view[Sysname] interface rprxge 3/1/1[Sysname-RPRXGE3/1/1] flow-interval 100frame-formatSyntaxframe-format { sdh | sonet }undo frame-formatViewRPRPOS interface viewDefault level2: System levelParameterssdh: Sets the framing format to SDH.sonet: Sets the framing format to SONET.DescriptionUse frame-format to set the framing format on the interface.Use undo frame-format to restore the default.By default, the framing format is SDH.Examples# Set the framing format on interface RPRPOS2/1/1 to SONET. system-view[Sysname] interface rprpos 2/1/1[Sysname-RPRPOS2/1/1] frame-format sonet