119display rrpp briefSyntaxdisplay rrpp brief [ | { begin | exclude | include } regular-expression ]ViewAny viewDefault level1: Monitor levelParameters|: Filters command output by specifying a regular expression. For more information about regularexpressions, see Fundamentals Configuration Guide.begin: Displays the first line that matches the specified regular expression and all lines that follow.exclude: Displays all lines that do not match the specified regular expression.include: Displays all lines that match the specified regular expression.regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.DescriptionUse display rrpp brief to display the brief RRPP information.Examples# Display the brief RRPP information. display rrpp briefFlags for Node Mode :M –- Master , T -- Transit , E -- Edge , A -- Assistant-EdgeRRPP Protocol Status: EnableNumber of RRPP Domains: 2Domain ID : 1Control VLAN : Major 5 Sub 6Protected VLAN: Reference Instance 0 to 2, 4Hello Timer : 1 sec Fail Timer : 3 secFast Detection Status: DisableFast Hello Timer: 10 ms Fast Fail Timer: 30 msRing Ring Node Primary/Common Secondary/Edge EnableID Level Mode Port Port Status--------------------------------------------------------------------------------1 1 M GigabitEthernet3/0/1 GigabitEthernet3/0/2 YesDomain ID : 2Control VLAN : Major 10 Sub 11Hello Timer : 1 sec Fail Timer : 3 secProtected VLAN: Reference Instance 0 to 2, 4Fast Detection Status: DisableFast Hello Timer: 10 ms Fast Fail Timer: 30 msRing Ring Node Primary/Common Secondary/Edge EnableID Level Mode Port Port Status----------------------------------------------------------------------------------
