198ViewInterface viewDefault level2: System levelParametersvalue: Minimum interval for receiving BFD control packets, in milliseconds. The value range and defaultvalue depend on the MPU model of the switch:• For switches with LSR1SRP2D1, MPU LSR1SRP2C1, or LSR1SRP2C2, the value is in the range of 10to 1000, and must be a multiple of 10. The default value is 400.• For switches with MPU LSR1SRP2B1 or LSR1SRP2B2, the value is in the range of 1000 to 10000,and must be a multiple of 100. The default value is 1000.DescriptionUse bfd min-receive-interval to configure the minimum interval for receiving BFD control packets.Use undo bfd min-receive-interval to restore the default.By default, the minimum interval for receiving BFD control packets is 400 milliseconds.If the remote switch sends BFD control packets at an interval shorter than the minimum receiving intervalof the local switch, the remote switch changes its sending interval to the minimum receiving interval of thelocal switch.Examples# Configure the minimum interval for receiving BFD control packets on VLAN-interface 1 as 500milliseconds. system-view[Sysname] interface vlan-interface 1[Sysname-Vlan-interface1] bfd min-receive-interval 500bfd min-transmit-intervalSyntaxbfd min-transmit-interval valueundo bfd min-transmit-intervalViewInterface viewDefault level2: System levelParametersvalue: Minimum interval for transmitting BFD control packets, in milliseconds. The value range anddefault value depend on the MPU model of the switch:• For switches with LSR1SRP2D1, MPU LSR1SRP2C1 or LSR1SRP2C2, the value is in the range of 10to 1000, and must be a multiple of 10. The default value is 400.• For switches with MPU LSR1SRP2B1 or LSR1SRP2B2, the value is in the range of 1000 to 10000,and must be a multiple of 100. The default value is 1000.
