62DLDP configuration commandsdisplay dldpSyntaxdisplay dldp [ interface-type interface-number ] [ | { begin | exclude | include } regular-expression ]ViewAny viewDefault level1: Monitor levelParametersinterface-type interface-number: Specifies a port by its type and number.|: Filters command output by specifying a regular expression. For more information about regularexpressions, see Fundamentals Configuration Guide.begin: Displays the first line that matches the specified regular expression and all lines that follow.exclude: Displays all lines that do not match the specified regular expression.include: Displays all lines that match the specified regular expression.regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.DescriptionUse display dldp to display the DLDP configuration of a port.If you do not provide the interface-type interface-number argument, this command displays the DLDPconfiguration of all the DLDP-enabled ports.Examples# Display the DLDP configuration of all the DLDP-enabled ports. display dldpDLDP global status : enableDLDP interval : 5sDLDP work-mode : normalDLDP authentication-mode : noneDLDP unidirectional-shutdown : autoDLDP delaydown-timer : 1sThe number of enabled ports is 1.Interface GigabitEthernet3/0/1DLDP port state : advertisementDLDP link state : upThe neighbor number of the port is 1 (the maximum number ever detected is 2).Neighbor mac address : 0000-0000-0100Neighbor port index : 79
