HAI AEGIS 3000 Owner's Manual
                                                                                      | |
Contents
| 
Page 43SETUPConfiguration and Advanced Control Programming (ACP)The Setup menu is used to configure operating parameters, program your system to do its automated control and securityfunctions using ACP, and give text and voice descriptions to all of your zones, units, buttons, codes, temperatures, and messages.To enter the Setup menu, from the top-level display or from the main menu, press the 8 (SETUP) key on the console keypad.Upon entry to the Setup mode, you will first be prompted to enter a security code:SET UPENTER CODE:A Master Code is required to enter the Setup mode.SET UP1=CODES 2=TIME 3=PROG ↓4=DIAL 5=ARM 6=MISC7=NAMES 8=VOICE ↑Set Up CodesAegis 3000 has 99 user codes that you may assign to users of the system. All Aegis 3000 security codes are 4 digits in length(0001 to 9999). Each user should be assigned a security code with an authority level, areas that can be accessed (if area arming isbeing used), and times in which the code will be valid. To set up a code, from the Setup menu, press the 1 (CODES) key. Usethe arrow keys to scroll through the codes.User Code 1 is always set to a Master code. The existing code number is not shown on the display. To change the code, enter afour digit number, then press the ' # ' key.Remember the code number. It will not be redisplayed.CODE 2:0000-9999 0000=DISABLEAuthority LevelPress the (↓) key. You will then be prompted for an authority level for that code:CODE 2 AUTHORITY: 31=MSTR 2=MGR 3=USER ◊1 = MasterMaster codes have complete access to the entire system.2 = ManagerManager codes can arm and disarm areas that they have access to, during assigned times. Managers can access the Main Menu ifthe system is in High Security Mode, and have telephone access privilege.3 = UserUser codes can only arm and disarm the system in assigned areas, during assigned times. Telephone access is not a privilege.Access AreasAfter an authority level has been entered, you will be prompted for access areas for the user. Specify which area(s) (if part ofyour system) the user has access to by pressing the number for each area. |
Related manuals for HAI AEGIS 3000
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine