HAI AEGIS 3000 Owner's Manual
                                                                                      | |
Contents
| 
Page 59Set-Up ArmingTo configure different arming and disarming options, from the Setup menu, press the 5 (ARM) key.Entry DelayThe Entry Delay is the time, in seconds, that you have to turn off the alarm after entering your home. The Entry Delay onlyapplies to the entry/exit zone (i.e. your doors). If someone comes in through a window, there will be no entry delay and thealarm will sound immediately.When you come in through a door on an entry/exit zone, the other zones are delayed too. This allows you to get to your phone orconsole to turn off the security system, even if you have to go through a room protected by a motion detector.Some doors (a back door or garage door) may be configured as a Double or Quadruple Entry Delay. If so, that door has twotimes or four times the entry delay shown on the display.The default Entry Delay is 15 seconds. If you wish to allow yourself more time to get in and turn off the security system, youmay set the entry delay between 15 and 45 seconds.ENTRY DELAY: 1515-45 SECONDS ↓The console will beep and the new entry delay will be displayed.Exit DelayThe Exit Delay is the time, in seconds, that you have to leave your house when you turn on the system. When arming the systemin Day, Night, or Away modes, the system will wait this amount of time before arming.The default exit delay is 15 seconds. You may change it from 15 to 180 seconds.EXIT DELAY: 1515-180 SECONDS ◊Audible Exit DelayThe Audible Exit Delay is an audible indication from the console beeper while the exit delay is in effect. During the last 10seconds of the exit delay, the audible indication will beep twice as fast to let you know that you must leave at once.The default setting for Audible Exit Delay is Yes.Entry/Exit ChimeWhen Entry/Exit Chime is set to Yes, the console(s) will beep once when a door on an entry/exit zone is opened, even if the alarmsystem is off. This lets you know when someone enters and leaves.The default setting for Entry/Exit Chime is Yes.Perimeter ChimeWhen Perimeter Chime is set to Yes, the console(s) will beep once when a window or any other perimeter zone is opened, even ifthe alarm system is off.The default setting for Perimeter Chime is Yes. |
Related manuals for HAI AEGIS 3000
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine