HAI AEGIS 3000 Owner's Manual
                                                                                      | |
Contents
| 
Page 44The display will show all areas that have been enabled for that user. After the area(s) is/are selected, press the ' # ' key.CODE 2 AREAS:1 2 0=CLR ◊You can specify the access (on/off) times for the code; this is, the time periods during which the code is valid.CODE 2 ON TIME:8:00 AM MTWTF-- #=CHNG◊CODE 2 OFF TIME5:00 PM MTWTF-- #=CHNG◊The times and days are changed by pressing the ' # ' key. Choose the 1 (TIME) key to change the On or Off times. You will beprompted to enter the new time. AM/PM must be specified for the time if the AM/PM format is being used, otherwise the enteredtime should be 13:00-23:59. Each item defaults to its current value. Press the up arrow key to select Sunrise and press the downarrow key to select Sunset.CODE 2(ON/OFF)TIME:1=TIME 2=DAYSTIME: 8:00 AMHHMM ↑=RISE/AM ↓=SET/PMTo change days, press the ' # ' key, then press the 2 (DAYS) key. You will be prompted to enter the day(s) that the code will bevalid. Press 1-7 for Monday - Sunday, 0 for Never, 8 for Weekdays, and 9 for Weekends.DAY(S): MTWTFSS1-7=MON-SUN 0=NEVERDuress CodeIf you are forced to disarm the system against your will by an intruder, disarm it as you normally would, but use the Duress Codeinstead of your normal code. The system will disarm normally. No sirens will sound, no lights will flash, but the Aegis 3000 willperform a silent dial out and say that this is a silent alarm.To stop a silent dial out, turn your security system off by pressing OFF, then your code.DURESS CODE:0000-9999 0000=DISABLE↑Set Up TimeTo set up time and date, from the Setup menu, press the 2 (TIME) key. You will be prompted to enter the new timeand date. AM/PM must be specified for the time if that format is being used, otherwise the entered time should be 13:00-23:59.TIME:HHMM ↑=AM ↓=PMDAYLIGHT SAVINGS TIME?0=NO 1=YESIf Daylight Savings Time is currently being observed (between spring and fall), set this item to "Yes". If Daylight Savings Timeis not currently being observed (between fall and spring) or is not observed in your geographic location, set this item to "No".This item is used to correctly calculate the times for sunrise and sunset.You are only asked this question when you set the time. Once the time is set, Aegis 3000 will automatically adjust the "time ofday" each time daylight savings time begins and ends.ENTER DATE:MMDDYY |
Related manuals for HAI AEGIS 3000
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine