HAI AEGIS 3000 Owner's Manual
                                                                                      | |
Contents
| 
Page 60Enable Quick ArmThe Quick Arm feature allows the security system to be armed by pressing the desired mode key twice instead of having to enteryour code.The default setting for Enable Quick Arm is No.Enable Auto BypassThe Auto-Bypass feature allows the system to automatically bypass an open zone when the system is armed, rather than setting offthe alarm. In some applications, it may be preferable to allow arming only if all zones are secure (READY).With Auto-Bypass Off, all zones to be armed must be secure when the system is armed. Otherwise, the console will beep threetimes and display "ZONE NOT RDY". If the system is armed and a zone is open when the Exit Delay expires, the alarm willsound.All On For AlarmThis option will instruct Aegis 3000 to execute an X-10 All On command in the event that any type of alarm occurs.Beep On TroubleIf the Aegis 3000 detects any troubles with itself or one of the zones connected to it, it will display a message on the screen andbeep the console twice per second, continuously (i.e. beep beep...beep beep...). You can silence this sound by pressing the ' * 'key. However, if the trouble occurs again, the beeper will start beeping again.If you do not wish to hear the beeping sound when a trouble occurs, set Beep On Trouble to No.The default setting for Beep On Trouble is Yes.Set up MiscellaneousTo configure Miscellaneous items in the system, from the Set Up menu, press the 6 (MISC) key.High Security ModeIn High Security Mode, the Master or Manager code is always required to do the following functions:• Any Control functions• Any Temperature Control• View the Event Log• Access the system from a local phoneWith High Security Mode Off, no code is required to access a local telephone.If your system is set up with High Security Mode On, the display will request the Master or Manager code whenever you selectone of these functions, even if the security system is Off. Simply enter your Master or Manager code.Your system was shipped from the factory with High Security Mode Off, which allows you to view the event log and access thelocal phones without having to enter a code. In most residential applications, this is appropriate. If you have a commercialinstallation, or would like added protection from unauthorized access to the system, you may wish to turn on High Security Mode.Announce AlarmsIf a Two-Way Audio Module is being used in a system, this item enables the system to speak the type of alarm and zone throughthe Aegis HMS consoles. When an alarm first occurs, the siren is activated. After a few seconds, the siren is turned off and thetype of alarm is announced. The siren is then reactivated.The default for Announce Alarms is No. |
Related manuals for HAI AEGIS 3000
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine