Media-Mate Plus Operation Manual 25-710-800-OMedia-Mate Plus Interface with Distek 2100 and 2100BFilling Six Vessels:1. Remove the two fittings labeled “not used” in Figure 7-1 below.2. Close the two shut-off valves to the seventh vessel at the Media-Mate Plus DispenseAssembly (see Figure 7-2).Figure 7-1Filling Seven Vessels:1. Remove the two fittings labeled “not used” in Figure 7-1 above.2. Connect the Single Flask Filling Assembly (p/n 25-710-415) to the Media-Mate PlusDispense Harness, #7 Quick Disconnect.3. Open the two shut-off valves to the seventh vessel at the Media-Mate Plus DispenseAssembly (see Figure 7-3).Section 7 Operating Instructions 27
