Hardi MUSTANG 3500 Operator's Manual

30HARDI® MUSTANG 3500 OPERATOR’S MANUALSections (Default setting = factory preset)The SYSTEM CAL position is used to set the number of sections thesprayer has. This number can be set to 3-7. This number is set at thefactory, the operator should not need to adjust this setting.Tips (Default setting = '0)This SYSTEM CAL position is used to determine which type of Flowrate is displayed in the Flow Per Minute rotary position:A) Flow for the entire boom - Flow Per BoomWhen TIPS = 0Gallons per minute (Liters per minute) is displayed for the entire boomB) Flow for individual sprayer tip - Flow Per NozzleWhen set to a nonzero value (TIPS = typically 24-73) depending onboom size MAX ounces 6553.5 per minuteNOTE: It is very important to ensure that the total number of spray tipsis entered or else the Flow Per Nozzle rate will be incorrectlycalculated.Dial position: Display will read:Dial position: Display will read:Dial position: Display will read:PSICAL bar metersinchesRate 1 2 3N / AcGal / 10003PSICAL barRate12 33ADJUST RATEBOOM WIDTH