Hardi Mercury Series Instruction Book

Contents

3 - Description33Use of the mist blowerThe HARDI mist blower is designed for applying chemical products used for crop protection. This equipment may only beused for this purpose. The use of this equipment for other purposes is not allowed. If there is no special law in your regionwhich obliges the user to have a permit, it is recommended to be well-prepared for protecting crops in a correct way andfor handling chemical products safely so as to avoid unnecessary risks to people and the environment while spraying takesplace.For environmental issues the air kit is offered with option to close either left or right side of the air stream from the blower.These blinds, are mandatory in some sensitive areas, to avoid chemical contaminated air, blowing towards river sides andwater channelsRoadworthinessWhen driving on public roads and other places where the road safety code or where there are other special rules andregulations for marking and lights on machinery, the machine must be equipped to comply with these regulations.μ ATTENTION! For models not fitted with brakes the maximum speed is 25 km/h and 40 km/h for those with. This couldvary according to local legislation. Contact your local authorities to find out the current maximum speed limits.Identification plateThe identification plate is located on the front right-hand side of themachine and is riveted to the chassis. It indicates the make, model, serialnumber, and date of manufacture.The serial number is also engraved onto the chassis. The number isfound above the identification plate, as indicated in the picture. Theserial number consist of five digits.The serial number is also engraved onto the chassis. The number isfound above the identification plate, as indicated in the picture. Theserial number consist of five digits.ChassisThe monoblock cold-pressed metal chassis is highly durable and built to last under everyday use under extreme conditions.It is manufactured using only the most advanced laser cutting and automated soldering processes. To protect againstcorrosion it is coated with a polyurethane bi-component paint on top of a highly adherent, steel blasted base.HARDI AUSTRALIA PTY. LTD.SERIAL NUMBER