816 - MaintenanceLubricationGeneral InfoAlways store lubricants clean, dry and cool - preferably at a constant temperature - to avoid contamination from dirt andcondensed water. Keep oil filling jugs, hoppers and grease guns clean, and clean the lubricating points thoroughly beforelubricating. Avoid skin contact with oil products for longer periods.Always follow the quality and quantity recommendations. If no quantity is recommended, grease the nipple until newgrease becomes visible.Pictograms in Lubrication & Oiling Plans Designate:1. Lubricant to be used (see “Recommended lubricants” below).2. Recommended intervals. Shown in hours or with a symbol foroccasional maintenance.3. Amount to be used. Only shown if an amount is specified.μ ATTENTION! If the sprayer has been cleaned with a high pressurewasher, lubrication of the entire machine is recommended.Recommended lubricantsLubricating and greasing the mistblowerBALL BEARINGS:Universal Lithium grease, NLGI No. 2SHELL RETINAX EP2CASTROL LMX greaseSLIDE BEARINGS:Lithium grease enhanced with molybdenum or grafite disulphateSHELL RETINAX HDM2CASTROL MOLYMAXOIL LUBRICATION:TOTAL Transmission TMSAE 80W/90Castrol EPX 80W/90SHELL Spirax 80W/90Mobil Mobilube 80W/90OIL LUBRICATION:SAE 30WSAE 20W/50A - 50 D - 150B - 100B - 100B - 250B - 250C - 250B - 10A - 50
