4 - Sprayer setup62Electrical connectionsInstallation of control unit bracketsFind a suitable place in the tractor cabin to mount the control units. Bestrecommended position is to the right of the driver seat.The supplied tractor pillar bracket (A) has a hole spacing of 100 and 120mm that fits most tractors. Threaded mounting holes may be hiddenbehind front corner cover. Check tractor instructions manual forinformation regarding attachment points.Three mounting tubes (B) are supplied. One, two or all three may beused. They can be bent and shortened. A spacer (C) is also supplied toallow further attachment possibilities. Find the best solution for yourtractor or vehicle.Tube (B) plate is staggered so that, if correctly orientated, all boxes willline up.μ ATTENTION! See also the controllers instruction book for furtherdetails of fitting the controller equipment.Road safety kitConnect the plug for rear lights to the tractor’s 7-pin socket, and check the function of rear lights, stop lights, side lights anddirection indicators on both sides before driving.The wiring is in accordance with ISO 1724. See section in “Technical specifications”.μ ATTENTION! Turn OFF all work lights when driving on public roads!100 -120mmABC
