Chapter 4. Installing Options 53Notes:1. Drives that are greater than 41.3 mm (1.6 in.) high cannot be installed.2. Install removable media (tape or CD) drives in the accessible bays: bay 1 or 2.Installing a driveTo install an internal drive, follow these steps.1. Remove the cover. See “Removing the cover - microtower model” on page 44.Note: If your computer has a CD drive or DVD drive, you might need to removethe signal and power cables from the drive.2. Remove the bay panel from the drive bay by inserting a flat-blade screwdriver atthe end and gently prying it loose.3. Remove the metal shield from the drive bay by inserting a flat-blade screwdriverinto one of the slots and gently prying it loose.1Bay 1 - Maximum Height: 41.3 mm (1.6 in.) CD-ROM drive (standard in some models)5.25-inch hard disk drive2Bay 2 - Maximum Height: 41.3 mm (1.6 in.) 5.25-inch hard disk drive3.5-inch hard disk drive (requires amounting bracket)CD-ROM driveDVD-ROM drive3Bay 3 - Maximum Height: 25.4 mm (1.0 in.) 3.5-inch diskette drive (preinstalled)4Bay 4 - Maximum Height: 25.4 mm (1.0 in.) Hard disk drive (preinstalled)