- Custom modeSelect this choice only if you understand the functions of the low-level IMMsettings. This is the only choice that enables you to change the low-levelIMM settings that affect the performance and power consumption of theserver.– Integrated Management ModuleSelect this choice to view or change the settings for the integratedmanagement module.- POST Watchdog TimerSelect this choice to view or enable the POST watchdog timer.- POST Watchdog Timer ValueSelect this choice to view or set the POST loader watchdog timer value.- Reboot System on NMIEnable or disable restarting the server whenever a nonmaskable interrupt(NMI) occurs. Disabled is the default.- Commands on USB Interface PreferenceEnable or disable the Ethernet over USB interface on IMM.- Network ConfigurationSelect this choice to view and select the system management networkinterface port, the IMM MAC address, the current IMM IP address, and hostname; define the static IMM IP address, subnet mask, and gatewayaddress; specify whether to use the static IP address or have DHCP assignthe IMM IP address; save the network changes; and reset the IMM.- Reset IMM to DefaultsSelect this choice to view or reset the IMM to the default settings.- Reset IMMSelect this choice to reset the IMM settings.– Legacy SupportSelect this choice to view or set legacy support.- Force Legacy Video on BootSelect this choice to force INT video support, if the operating system doesnot support UEFI video output standards.- Rehook INTSelect this choice to enable or disable devices from taking control of theboot process. The default is Disable.- Legacy Thunk SupportSelect this choice to enable or disable UEFI to interact with PCI massstorage devices that are not UEFI compliant.- NetworkSelect this choice to view or configure optional network devices, such asiSCSI, PXE, and network devices. There might be additional configurationchoices for optional network devices that are compliant with UEFI 2.1 andlater.v Date and TimeSelect this choice to set the date and time in the server, in 24-hour format(hour:minute:second).This choice is on the full Setup utility menu only.v Start OptionsChapter 3. Configuring the server 89
