Understanding the MFP control panel152Using the MFP control panel and menusHome screenOnce the MFP is turned on, the LCD shows the following screen which is referred to as the Homescreen:The top two lines direct you to press any button to the left. The buttons to the left are theAdministration button, which has a key icon on it, and the Copy, Fax, E-mail, and Print/Profilesbuttons.The last three lines on the Home screen are used for status messages. If you cannot see a completemessage, you can use the left and right arrow buttons to move through the entire message. For moreinformation on buttons, see Buttons as follows.ButtonsUse the control panel buttons to open a menu, scroll through a list of values, make a selection tochange settings, and respond to messages.Use the numbered buttons to specify the number of copies, to enter shortcuts or your personalidentification number (PIN) after you send a confidential print job from the print driver, or to dialphone numbers for faxes. A confidential job is one type of job from the Print and Hold jobs. For moreinformation, see Using the Print and Hold function.The following table includes descriptions or the function of each button. See the illustration onpage 151 of the control panel to identify the placement of the buttons:Button FunctionAdministration (key)Note: A key icon is molded into it.Press to access the administration menus. These menus are onlyavailable when the MFP is in the Ready state.Copy Press to access the Copy menus.If the Home screen is displayed, press a number to access the Copymenus, too.Press Start to launch a copy.Fax Press to access the Fax menus.E-mail Press to access the E-mail menus.Print/Profiles Press to access the Print/Profile menus.Press any buttonon the left to begin.ReadyDate/Time
