v PCI Wake Up: If this setting is enabled, your computer turns on in responseto wake up requests from PCI devices that support this feature.To set automatic power-on features, follow these steps:1. Start the Configuration/Setup Utility program (see “Starting and using theConfiguration/Setup Utility program” on page 29).2. Select Power Management and press Enter.3. Select Automatic Power On and press Enter.4. Select the menu item for the feature you want to set. Select either Enabledor Disabled. Press Enter.5. Select Startup Sequence for the feature. Select either Primary or Automatic.If you select Automatic, make sure Automatic Power On Startup Sequencein the Startup Sequence menu is set to Enabled. Otherwise, the system willuse the Primary Startup Sequence.6. Press Esc until you return to the Configuration/Setup Utility programmenu.7. Select Save Settings from the Configuration/Setup Utility program menuand press Enter. Then press Esc and follow the instructions on the screen toexit from the Configuration/Setup Utility program.42 User Guide
