Table 3-2 (Page 4 of 9). Firmware Error Codes.Error Code Description Action/Possible Failing FRU002 Test Unit Ready Failed - sense dataavailable1. Media (Removable media devices)2. SCSI device003 Send Diagnostic Failed 1. SCSI device004 Send Diagnostic Failed - DevOfl cmd 1. SCSI device21E00xxx SCSI Tape Refer to 21A00xxx (SCSI disk drive) forxxx definitions21ED0xxx SCSI Changer Refer to 21A00xxx (SCSI disk drive) forxxx definitions21EE0xxx Other SCSI device type Refer to 21A00xxx (SCSI disk drive) forxxx definitions21F00xxx SCSI CDROM Refer to 21A00xxx (SCSI disk drive) forxxx definitions21F20xxx SCSI Read/Write Optical Refer to 21A00xxx (SCSI disk drive) forxxx definitions25010xxx Flashxxx=000 No diskette in drive Insert diskette containing firmwareimage.001 Diskette seek error 1. Retry function2. Replace diskette drive3. Replace diskette cable4. Replace system board (See noteson page 3-1.)002 Diskette in drive does not contain an*.IMG file.Insert diskette with firmware update file.003 Cannot open OPENPROM package Replace system board. (See notes onpage 3-1.)004 Cannot find OPENPROM node Replace system board. (See notes onpage 3-1.)006 System id does not match imagesystem idMake sure correct firmware updatediskette is being used with this system.007 Image has bad CRC Replace firmware updated diskette008 Flash is write protected, updatecancelled1. Turn off, turn on system unit andretry.2. Replace system board. (See noteson page 3-1.)009 Flash module is unsupported or notrecognizedMake sure correct firmware updatediskette is being used with this system.Chapter 3. Error Code to FRU Index for Model 140 and Model 240 3-7
