Table 4-1 (Page 2 of 11). Firmware Error CodesError Code Function /DescriptionRepair Action/Possible Failing FRU20D0000F Selftest failed ondevice, noerror/location codeinformation availableCheck the SMS error log entry for this error code. Thelocation code (if present) in the error log entry shouldidentify the location of the failing device.20D00010 Selftest failed ondevice, can't locatepackageSoftware Error (Contact your service representative forassistance.)20D00011 Replace riser card. Swap the old VPD module from the old riser card tothe new one rrective actionsSecurity20E00000 Power on Passwordentry errorThe password has been entered incorrectly.Retry installing the password.20E00001 Privilege Passwordentry errorThe password has been entered incorrectly.Retry installing the password.20E00002 Privilege PasswordJumper not enabledThe Privileged Password jumper is not in the correctposition for password initial entry.Consult the system's User's Guide for pin location andjumper position.20E00003 Power on Passwordmust be set forUnattended modeUnattended mode requires the setting of the Power Onpassword before it is enabled.20E00004 Battery drained orneeds replacement1. Replace battery2. Replace System Planar20E00005 EEPROM locked 1. Power Off/On machine2. Replace System Planar20E00008 CMOS corrupted ortampering evident,CMOS initializedCheck your machine for evidence of tamperingIf NO tampering:1. Replace battery, restore NVRAM data (passwords,startup data)2. Replace System Planar20E00009 Invalid passwordentered - systemlockedThe password has been entered incorrectly 3 times.Power Off/On the machine and enter the passwordcorrectly20E0000A EEPROM lockproblemIf for PAP install, is jumper in correct position?Consult the system's User's Guide for pin location andjumper position.1. Power Off/On machine2. Replace System Planar20E0000B EEPROM writeproblem1. Power Off/On machine2. Replace System Planar4-2 7043 43P Series Service Guide
