IBM RS/6000 7043 43P Series Service Manual

Also see for RS/6000 7043 43P Series: Supplemental service manual User guide User guide Setup instructions

Contents

4. Store any memory modules you are no longer using in a static-protectivepackage.5. Install any adapters you removed into their original connectors. If you needfurther information on installing adapters, see “Adapter” on page 8-19ReplacementNote: When installing memory module, install the new modules into the firstavailable connector, starting at slot A (DIMM 0). Memory modules for theModel 240 must be installed in identical pairs (size and speed).1. The memory modules are keyed so that they can only be inserted one way.Align the memory module notches with the keys in the memory connector.2. Insert the memory module into the next unused memory connector. Push downon the memory module until the latch tabs lock the memory module into theconnector. (Do not attempt to move the latch tabs yourself. They lockautomatically when you have fully inserted the memory module.)8-22 7043 43P Series Service Guide