Chapter 2. Maintenance Analysis Procedures (MAPs)This chapter contains Maintenance Analysis Procedures (MAPs) for the Model 140,Model 150, and Model 240.Entry MAPNotes:1. When possible, run Online Diagnostics in Service Mode. Online Diagnosticsperform additional functions, compared to Standalone Diagnostics. This ensuresthat the error state of the system is captured in NVRAM for your use in fixing theproblem. The AIX error log and SMIT are only available when diagnostics arerun from the hard drive.2. Licensed programs frequently rely on either network configuration, vital productdata (VPD) stored on the operator panel control assembly, or system boardinformation to authorize program use. If the MAPs indicate that the networkadapter, operator panel, or system board should be replaced, notify the systemowner that new keys for licensed programs may be required.3. If a network adapter or the system board is replaced, the network administratormust be notified so that the client IP addresses used by the server can bechanged. In addition, the operating system configuration of the networkcontroller may need to be changed in order to enable system startup, and anyclient or server that addresses this system should be updated. After completingthe recommended actions in this chapter, go to "MAP 0410: Repair Checkout" inthe Diagnostics Information for Multiple Bus Systems.Chapter 2. Maintenance Analysis Procedures (MAPs) 2-1
