IBM eServer 380 xSeries User Reference Manual

Also see for eServer 380 xSeries: Installation guide

Contents

22 xSeries 380: User’s ReferenceThe following table describes the choices available from the Security menu.ChipsetConfigurationRequest BusParking[Disabled]EnabledDefines whether to park onthe system bus.BINIT Input [Disabled]EnabledEnables all host bus agentsto enable bus initialization(BINIT) observation logic.In-Order QueueDepth[08] Defines the in-order queuedepth. When set to 1, allagents on the host bus limittheir in-order queue depth to1.BSP JumperSelected[Disabled] EnabledCPU WorkArounds[Auto] Manual Defines Processor Dispersal,DET stalls, and otherprocessor settings.Memory RelatedItems[Disabled] Enabled Defines System ECC, BaseMemory Test Interval,Defective DIMM Mapout, andClear Bad Memory Row.Event LogConfigurationEvent Logging [Enabled] Disabled Enables or disables loggingof system events.Enable BERR [Enabled] Disabled Enables or disables bus error(BERR) event generation.Enable SERR [Enabled] Disabled Enables or disables PCIsystem error (SERR) eventgeneration.Enable PERR [Enabled] Disabled Enables or disables PCIparity error (PERR) eventgeneration.Enable BINIT [Enabled] Disabled Enables or disables BINITevent generation.Enable HostBusDATA ERROR[Enabled] Disabled Enables or disablesprocessor data errorchecking.Enable HostBusADDR PARITY[Enabled] Disabled Enables or disablesprocessor Address ParitycheckingClear All MCARecords[Disabled] Enabled Enables or disables thelogging of MCA records onNVRAM.Menu item Default value DescriptionAdministrator Password Is [Not Installed]administrator_passwordThe current administratorpassword. To set theadministrator password, usethe Set AdministratorPassword menu item.User Password Is [Not Installed]user_passwordThe current user password.To set the user password,use the Set User Passwordmenu item.Primary menu Item submenu Item value Description