IBM eServer 380 xSeries User Reference Manual

Also see for eServer 380 xSeries: Installation guide

Contents

Chapter 4. Configuring your server 275. Type the following: CD selview6. Run the utility by typing the following command:SelviewYou can select the following actions:File Open and save System Event Log files. You can also exit from the utility fromthis menu.SEL Manage System Event Log files by reloading data, displaying properties,clearing log entries, and sorting files by various fields.Help Provides information on the utility.Using the Server Management Configuration UtilityUse the Server Management Configuration Utility to perform the following tasks:• Configure power restoration policies when the system loses AC power• Set the accelerated cool-down timeout• Set the Fault Resilient Boot (FRB) time-out• Enable or disable Platform Event Filtering (PEF) and Platform Event Paging(PEP)• Configure the Advanced Configuration and Power Interface (ACPI) featuresNote: For the latest version of the utility, go to the IBM Personal Computing Webpage at http://www.ibm.com/pc/support.To use the Server Management Configuration Utility, do the following:1. Insert the System Utilities CD into the CD-ROM drive.Note: You can run the utility directly from the System Utilities CD or from adiskette you create from the CD. If you choose to run the utility from adiskette, follow the instructions in the READ.TXT file on the CD.2. Type the following command from the EFI shell prompt:issue: map -r3. Locate the FSx where x is the CD-ROM drive (FF).4. Issue FSx: for the CD-ROM drive.5. Type the following: CD SMConfig6. Run the utility by typing the following command:SMConfigThe following table provides a summary of the actions available from the utility mainmenu.Menu item DescriptionFile open Opens a different .ini file of configuration data.Config Select from a dynamic list of options for the configurationclasses in the current .ini file.