IEI Technology FLEX-BX100-ULT5 User Manual

FLEX-BX100-ULT5Page 93 If considerable amounts of dust, water, or fluids enter the device, turn offthe power supply immediately, unplug the power cord, and contact theFLEX-BX100-ULT5 vendor. This equipment is not suitable for use in locations where children arelikely to be present. DO NOT:o Drop the device against a hard surface.o In a site where the ambient temperature exceeds the rated temperatureB.1.2 Anti-static PrecautionsWARNING:Failure to take ESD precautions during the installation of theFLEX-BX100-ULT5 may result in permanent damage to theFLEX-BX100-ULT5 and severe injury to the user.Electrostatic discharge (ESD) can cause serious damage to electronic components,including the FLEX-BX100-ULT5. Dry climates are especially susceptible to ESD. It istherefore critical that whenever the FLEX-BX100-ULT5 is opened and any of the electricalcomponents are handled, the following anti-static precautions are strictly adhered to. Wear an anti-static wristband: Wearing a simple anti-static wristband canhelp to prevent ESD from damaging any electrical component. Self-grounding: Before handling any electrical component, touch anygrounded conducting material. During the time the electrical component ishandled, frequently touch any conducting materials that are connected to theground. Use an anti-static pad: When configuring or working with an electricalcomponent, place it on an anti-static pad. This reduces the possibility of ESDdamage. Only handle the edges of the electrical component: When handling theelectrical component, hold the electrical component by its edges.