IEI Technology FLEX-BX100-ULT5 User Manual

FLEX-BX100-ULT5Page 15may only be carried out by qualified personnel who are familiar with theassociated dangers. Never open the equipment. For safety reasons, theequipment should be opened only by qualified skilled person. Air Circulation: Make sure there is sufficient air circulation when installingthe FLEX-BX100-ULT5. The FLEX-BX100-ULT5’s cooling vents must not beobstructed by any objects. Blocking the vents can cause overheating of theFLEX-BX100-ULT5. Leave at least 5 cm of clearance around theFLEX-BX100-ULT5 to prevent overheating. Grounding: The FLEX-BX100-ULT5 should be properly grounded. Thevoltage feeds must not be overloaded. Adjust the cabling and provide externalovercharge protection per the electrical values indicated on the label attachedto the back of the FLEX-BX100-ULT5.3.3 Installation ProcedureTo properly install the FLEX-BX100-ULT5, the following steps must be followed. Detaileddescriptions of these instructions are listed in the sections that follow.Step 1: Unpacking the FLEX-BX100-ULT5 box PCStep 2: Install HDDStep 3: Install PoE card (optional)Step 4: Install M.2 SSD (optional)Step 5: Install wireless LAN module and antenna (optional)Step 6: Convert to panel PC (optional)Step 7: Mount the FLEX-BX100-ULT5Step 8: Connect the peripheral devicesStep 9: Power the system up Step 0: