IEI Technology FLEX-BX100-ULT5 User Manual

FLEX-BX100-ULT5Page 584.4.1.2 Graphics ConfigurationUse the Graphics Configuration menu (BIOS Menu 22) to configure the graphicssettings.Aptio Setup Utility – Copyright (C) 2020 American Megatrends, Inc.ChipsetGraphics ConfigurationDVMT Pre-Allocated [32M]DVMT Total Gfx Mem [MAX]Primary IGFX Boot Display [VBIOS Default]Backlight Control [LED]Select DVMT 5.0Pre-Allocated (Fixed)Graphics Memory size usedby the Internal GraphicsDevice.---------------------: Select Screen↑ ↓: Select ItemEnter Select+ - Change Opt.F1 General HelpF2 Previous ValuesF3 Optimized DefaultsF4 Save & ExitESC ExitVersion 2.20.1271. Copyright (C) 2020 American Megatrends, Inc.BIOS Menu 22: Graphics Configuration DVMT Pre-Allocated [32M]Use the DVMT Pre-Allocated option to set the amount of system memory allocated to theintegrated graphics processor when the system boots. The system memory allocated canthen only be used as graphics memory, and is no longer available to applications or theoperating system. Configuration options are listed below: 32M D EFAULT 64M DVMT Total Gfx Mem [MAX]Use the DVMT Total Gfx Mem option to select DVMT 5.0 total graphic memory size usedby the internal graphics device. The following options are available: 128M 256M