IEI Technology FLEX-BX100-ULT5 User Manual

FLEX-BX100-ULT5Page 69WARNING:Take Anti-Static precautions whenever maintenance is being carriedout on the system components. Failure to take anti-static precautionscan cause permanent system damage. For more details on anti-staticprecautions, please refer to Section 3.1.5.1 System Maintenance OverviewNOTE:When doing maintenance operations on the system, please follow theinstructions in this chapter. Failure to follow these instructions may leadto personal injury and system damage.To preserve the working integrity of the FLEX-BX100-ULT5 box PC, the system must beproperly maintained. If box PC components need replacement, the proper maintenanceprocedures must be followed to ensure the system can continue to operate normally.5.2 System TroubleshootingThis section provides some simple troubleshooting suggestions.5.2.1 The System Doesn’t Turn OnIf after turning the system on, there is no power (indicated by the power LED on the frontpanel not turning on) please do the following:Step 1: Check that the power cable connector is properly connected to the system frontpanel.Step 2: Check that the power cable connector is properly plugged into the power source.Step 3: Make sure the power button is turned on.