355 MENU SCREENLCD ContrastAdjust the contrast of the LCD between 0 and 10 in 1digit steps. (Default: 6)D User Menu itemsLCD DimmerAdjusts the backlight brightness of the LCD between0 (dark) and 10 (bright) in 1 digit steps. (Default: 5)1 to 10 : Lights during transceiver power is ON.0 : Turns OFF the backlight.BacklightSet the LCD backlight timer to OFF, Continuous, 5seconds to 90 seconds in 5 second steps.(Default: CONT)CONT : Lights continuously during transceiverpower is ON.5sec to 90sec : Lights when some operation is per-formed, goes out after specified timeperiod.OFF : Never lights.BEEP LevelAdjust the confirmation beep level between 0 (OFF)and 50 (Maximum) in 1 digit steps.(Default: 30)* When the Advanced User Menu in the Admin Menu is set to OFF, these items are not displayed. In this case, only the LCDContrast, LCD Dimmer, Backlight, BEEP Level, Squelch Level, Noise Blanker, RF Power and Mic Gain can be adjusted thevalue or set the setting.■ User MenuD Entering User Menuq Hold down [MENU](HOME) for 1 second to enterthe Menu screen.w Push [r] or [s] to select the User Menu, and thenpush [4].e Push [r] or [s] to select the desired item.r Push [t](§) or [u](§§§) to adjust or set the value orsetting.• Hold down [Default](§§) for 1 second to set the defaultvalue or setting .t Push [MENU](HOME) twice to return to the normaloperating screen.[Default] [�][�]/