761SPECIFICATIONSD General• Frequency coverage : (Unit: MHz)Receive 0.5–29.9999Transmit 1.6–29.9999• Type of emission :AUS versions J3E (USB), A3E (AM) RX onlyOther versions J3E (USB/LSB), A1A (CW),A3E (AM), F1B (FSK)• No. of memory Ch. : 500 channels (maximum)• Usable temp. range : –30˚C to +60˚C• Frequency stability : ±0.3 ppm (–30˚C to +60˚C)• Power supply : 13.8 V DC (negative ground)AUS versions 10.8–15.6 V DCOther versions 11.73–15.87 V DC• Current drain :Transmit Less than 28 A(at maximum power)Receive Less than 3.0 A(at maximum audio)• Dimensions : (projections are not included)Main/Front package 62(W)×174(H)×259(D) mm• Weight : (approximately)Main/Front package 3.8 kgD Transceiver• Output power : (typical)AUS versionsJ3E HIGH 100 W p-pMID 50 W p-pLOW 10 W p-pOther versionsJ3E/A1A HIGH 125 W p-pMID 50 W p-pLOW 10 W p-pA3E HIGH 30 W CarrierMID 12.5 W CarrierLOW 3 W CarrierF1B HIGH 75 W p-pMID 50 W p-pLOW 10 W p-p• Spurious emission : 64 dB (typical)below peak output power• Carrier suppression : 50 dBbelow peak output power• Unwanted sideband suppression :400 Hz 55 dBbelow peak output power1 kHz 65 dBbelow peak output powerD Receiver• Sensitivity:J3E (Pre Amp ON)(0.5–1.5999 MHz) 14 dBμV (10 dB S/N)(1.6–29.9999 MHz) –14 dBμV (10 dB S/N)A3E(0.5–1.5999 MHz) 22 dBμV (10 dB S/N)(1.6–29.9999 MHz) 6 dBμV (10 dB S/N)• Spurious response rejection ratio:More than 70 dB• AF output power : (at 13.8 V DC)More than 4.0 W at 10%distortion with a 4 Ω load• Clarifier range : ±200 HzAll stated specifications are typical and subject to change without notice or obligation.