Icom IC-F8100 Instruction Manual

Also see for IC-F8100: Instruction manual Instruction manual Service manual Service manual Manual

862OPTIONS1234567891011121314151617 Quick ReferenceAT-140 automatic antenna tunerAntenna and control cable receptaclesfor easy installation and tuner throughfunction are available.OPC-2142 shielded control cableThe shielded control cable protects thetransceiver from RF feedback and ex-tends the separation between the AT-140and the transceiver up to 10 meters.OPC-2142: 4 pinOPC-2143 shielded control cableThe shielded control cable protects thetransceiver from RF feedback and ex-tends the separation between the AT230and the transceiver up to 5 meters.OPC-2205 shielded control cableThe shielded control cable protects thetransceiver from RF feedback and con-nects the AT-140 or a GPS receiver to thetransceiver.AD-119 junction boxAllows you to connect the AT-140, AT230external modem or PC to the trans-ceiver.MB-126 mounting bracketCFU-F8100 cooling fanRMK-6 separation kitThe same as that supplied with the IC-F8100 Separated Type).Allows you to install the transceiver Frontpanel separate from the Main unit for op-erating convenience. The RMK-6 requireseither the OPC-607, OPC-608, OPC-609or OPC-726 separation cable.OPC-607/OPC-608/OPC-609/OPC-726separation cableOPC-607 : 3 mOPC-608 : 8 mOPC-609 : 1.9 mOPC-726 : 5 mRecommended Automatic tuning antenna, AT230 from Moonraker Australia Pty. LimitedThe AT230 is a 2.6 m length mobile whip antenna with an automatic tuning function. The antennamatches 2–30 MHz continuously. Use the optional OPC-2143 cable for use with the IC-F8100.Ask your dealer for details.SP-10 external speakerSP-25 external speakerSP-30 external speakerThe SP-25 is the same as that suppliedwith the IC-F8100. A mounting bracket issupplied with the speaker.Maximum AF input/impedance: 6 W/4 ΩHM-193 hand microphoneSame as supplied with the IC-F8100 Onepackage type or Separated Type.HM-192 remote control microphoneSame that as supplied with the IC-F8100Remote control microphone type.Allows you to remotely control the trans-ceiver with the microphone. The HM-193requires either the OPC-607, OPC-608,OPC-609 or OPC-726 separation cable.