415 MENU SCREENShift FrequencySet the frequency shift for the Data mode to 1800HzUSB, 1500Hz USB, 1800 Hz LSB or 1500Hz LSB.(Default: 1800Hz USB)ScanSet the scan type to ALE, SELCALL, VOICE, CALL,ALL MEMORY or OFF. (Default: OFF)Scan ResumeSet the scan resume ON or OFF.(Default: OFF)When this setting is ON, a scan pauses for 10 sec-onds, then resumes, or resumes after 2 secondswhen the signal disappears.Selcall SilentSet the automatic answer back function for the SelcallON or OFF. (Default: OFF)When OFF is selected, the transceiver automaticallyanswers back if your station ID is called.Selcall Time OutIf you are calling a specific station, but no answer isreceived, then transceiver cancels waiting for an an-swer back after this time period.Set the waiting time for the Selcall answer back whilecalling. (Default: 60 sec)D Admin Menu items (Continued)Scan Auto StartSets the scan resume timer to between 1 minute to10 minutes or OFF, for all scan types. (Default: OFF)When this setting is ON, scan pauses for the set timeperiod after your last transmitted, then resumes.Scan SpeedSet the scan speed for the All Memory scan to HIGH,MID or LOW. (Default: HIGH)