Icom IC-M502 Instruction Manual

Also see for IC-M502: Operational manual Service manual Instruction manual Service manual Instruction manual

Icom IC-M502 Instruction Manual Manual pdf 18 page image

146 DSC OPERATIONn MMSI code programmingThe 9-digit MMSI (DSC self ID) code can be programmed atpower ON.This function is not available when the MMSI code hasbeen programmed by the dealer. This code programmingcan be performed only 2 times.q Turn power OFF.w While pushing [DSC/ENT], turn power ON to enter MMSIcode programming condition.e After the display appears, release [DSC/ENT].r Select the desired number by rotating the channel selector.t Push [CH/WX] to advance the cursor.• Push [SCAN] to move the cursor backward.y Repeat steps r and t to input 9 digit code.u Push [DSC/ENT] to input and set the code.• The previously selected channel appears.n Position and time programmingA distress call should include the ship’s position and time. Ifno GPS is connected, your position and UTC (Universal TimeCoordinated) time should be input. They are included auto-matically when a GPS receiver (NMEA0183 ver. 2.0) is con-nected.This function is not available when an optional GPS re-ceiver (NMEA0183 ver. 2.0) is connected.q Push [DSC/ENT] twice to enter the position programmingcondition.w Rotate the channel selector to select the digit of your posi-tion.e Push [CH/WX] to advance the cursor.• Push [SCAN] to move the cursor backward.• Push [HI/LO] to clear the position data.Input POSLAT: ° 'LON: ° 'Null˘[H/L]Set MMSIä23456789