Icom IC-M502 Instruction Manual

Also see for IC-M502: Operational manual Service manual Instruction manual Service manual Instruction manual

Icom IC-M502 Instruction Manual Manual pdf 59 page image

5513HM-127 REMOTE-CONTROL MICROPHONEn Set mode programmingSet mode is used to change the condition of the transceiver’sfunctions and the microphone’s own functions:Transceiver’s functions—scan mode (normal or priority), scan resume timer, weatheralert, dualwatch/tri-watch selection, DSC watch, transceiver’sbeep tone, internal speaker (transceiver), LCD contrast(transceiver), RF attenuation level, scrambler code andscrambler type.Microphone’s own functions—beep tone function (microphone) and LCD contrast (micro-phone).In this section, instructions are for the microphone’s own func-tions only. Refer pgs. 30–33 for the setting of the other func-tions. (Some functions may not be selected from the micro-phone.)Entering set modeq Turn power OFF.w While pushing [16•9], turn power ON.• After beep emission, a set mode item (in the channel name indi-cator and condition in the channel number readout) is displayed.e Push [16•9] to select the desired item, if necessary.r Push [Y]/[Z] to select the desired condition of the item.t Turn power OFF, then ON to exit set mode.• Beep tone “BEEP”å Push [Y] to turn ON, [Z] to turn OFF the beep output.• LCD contrast “LCD CONTRAST”å Push [Y]/[Z] to adjust to a suitable LCD contrast.Push• •• •Push

/ 62

Related manuals for Icom IC-M502