Icom IC-M502 Instruction Manual

Also see for IC-M502: Operational manual Service manual Instruction manual Service manual Instruction manual

Icom IC-M502 Instruction Manual Manual pdf 25 page image

216DSC OPERATIONn Setting the distress informationThe nature of the distress call should be included in the dis-tress call.q Push [DSC/ENT] to select the DSC menu.w Rotate the channel selector to select “DTRS set” and push[DSC/ENT].e Rotate the channel selector to select the nature of the dis-tress, then push [DSC/ENT].• ‘Undesign (Undesigned),’ ‘Explosion,’ ‘Flooding,’ ‘Collision,’‘Grounding,’ ‘Capsizing,’ ‘Sinking,’ ‘Adrift (Disable adrift),’ ‘Aban-doning (Abandoning ship),’ ‘Piracy (Piracy attack),’ ‘MOB (Manoverboard)’ and ‘EPIRB (EPIRB emission)’ are available.r The position information appears. Set the current position,then push [DSC/ENT].• Rotate the channel selector to select the character.• Push [CH/WX] to advance the cursor.• Push [SCAN] to move the cursor backward.• Push [HI/LO] to clear the position data.t The time information appears. Set the current time, thenpush [DSC/ENT].• Rotate the channel selector to select the numeral.• Push [CH/WX] to advance the cursor.• Push [SCAN] to move the cursor backward.• Push [HI/LO] to clear the time data.y Push [DISTRESS] for 5 sec. to transmit the distress call.• Push [DSC/ENT] to exit the condition.• The selected nature of the distress is stored for 10 minutes.Input timeUTC: :Null˘[H/L]Input POSLAT: ° 'LON: ° 'Null˘[H/L]Sel nature˘ExplosionUndesignFloodingSel itemRCV calls˘DTRS setSet-up