Icom IC-M502 Instruction Manual

Also see for IC-M502: Operational manual Service manual Instruction manual Service manual Instruction manual

Icom IC-M502 Instruction Manual Manual pdf 21 page image

176DSC OPERATIONn Transmitting DSC callsTransmitting individual callThe individual call function allows you to transmit a DSC sig-nal to a specific party only.q Select a desired channel other than channel 70.w Push [DSC/ENT] to select the DSC menu.e Rotate the channel selector to select “individual” and push[DSC/ENT].r Rotate the channel selector to select the desired pre-pro-grammed individual address; or push [DSC/ENT] while“Manual set” is displayed, to set the ID code for the indi-vidual you wish to call.• The ID code for the individual call can be set in advance. (p. 22)t Push [DSC/ENT] to transmit the individual call.• Channel 70 is selected and the individual call is transmitted tothe selected station.• If channel 70 is busy, the transceiver standbys until the channelbecomes clear.• Routine category only is available.y Standby on channel 70 until an acknowledgement is re-ceived.u When the acknowledgement is received, the displaychanges to the previously selected user channel withbeeps.i Push and hold [PTT] to communicate your message to theresponding party.IndividualWait for ACKCompletedTo call,To cancel[other][DSC/ENT]IndividualTo cancel[other]Ch70 is BUSYPush [DSC/ENT] to transmit DSC call. When Ch70 is busy.Sel addressIcom˘Manual setJohnSel item˘IndividualINDV ACKAll ships