Icom IC-M502 Instruction Manual

Also see for IC-M502: Operational manual Service manual Instruction manual Service manual Instruction manual

Icom IC-M502 Instruction Manual Manual pdf 50 page image

4613 HM-127 REMOTE-CONTROL MICROPHONEn Function displayq CHANNEL GROUP INDICATOR (pgs. 6, 50)Indicates whether an International (INT), U.S.A. (USA) orCanadian (CAN) channel is selected.w KEY LOCK INDICATOR (p. 52)å Appears while the key lock function is in use.å Flashes while the all key lock function is in use.e CHANNEL NUMBER READOUTå Indicates the selected operating channel number. “A”appears when a simplex channel is selected. (pgs. 6,50)å In set mode, indicates the selected condition. (pgs. 30,55)r VOLUME INDICATOR (p. 51)Appears while audio output level is adjusted.t SQUELCH INDICATOR (p. 51)Appears while noise squelch level is adjusted.y CHANNEL NAME INDICATORå Channel comment appears (and scrolls) if programmed.(pgs. 9, 56)å In set mode, indicates or scrolls the selected set modeitem. (pgs. 30, 55)u ATTENUATOR INDICATOR (pgs. 8, 51)Appears when the RF attenuator is in use.i SCRAMBLER INDICATOR (pgs. 10, 53)Appears when an optional voice scrambler is activated.o SCAN INDICATOR (pgs. 13, 54)å “SCAN” appears during normal scan.å “P SCAN” appears during priority scan.!0 PRIORITY CHANNEL INDICATORå Indicates a priority channel during priority scan ordual/tri-watch. (pgs. 12, 54)å “IC” appears during intercom mode. (pgs. 29, 56)CALLWX ALTDUPP SCANSCRMLOCALTRIDUALLOWTAGCANUSAINTLTX BUSYVOLSQLqwrte!8 !7 !4!5 !3!2!1!0oiuy!6