94TONE SQUELCH OPERATION (Multi-function receiver/Component screens only)9■ Tone/DTCS operationThe tone or DTCS opens only when receiving a signal withthe same pre-programmed subaudible tone or DTCS code,respectively in FM mode. You can silently wait for the speci-fied signal using the same tone.D Tone squelch frequency settingqClick zFMx to select FM mode.wClick zTSQLx to turn the tone squelch ON.• “TSQL” appears in the function display.eRight-click zTSQLx to display the [TSQL] setting screen.rClick zZx to select the desired tone squelch frequency.• 51 tone frequencies from 67.0 to 254.1 Hz are available.tCheck the [Reverse Action] check box to mute the receivedaudio signal when the received signal’s tone is matched.• “R” appears in the function display.yClick the close button ([X]) to close the [TSQL] settingscreen.uWhen the received signal includes a matched tone,squelch opens and the signal can be heard.• When the [Reverse Action] check box is checked in step t, thereceived audio signal is muted.• When the received signal’s tone is not matched, tone squelchdoes not open, however, the S-indicator shows signal strength.iClick zTSQLx again to cancel the tone squelch.• “TSQL” disappears.• Available tone squelch frequencies list (Hz)MODE/VOL PANELIndicatorsActive band onlyActive band onlyzTSQLxzTSQLx• [Compo] screen• [Receiver] screenIC-PCR2500IC-PCR1500IC-PCR2500IC-PCR1500• [TSQL] screene Clickq Select the desired tone squelch frequency.wReverse Action indicatorTone squelch indicatorCheck the check box to turnthe Reverse Action ON.67.069.371.071.974.477.079.782.585.488.591.594.8097.4100.0103.5107.2110.9114.8118.8123.0127.3131.8136.5141.3146.2151.4156.7159.8162.2165.5167.9171.3173.8177.3179.9183.5186.2189.9192.8196.6199.5203.5206.5210.7218.1225.7229.1233.6241.8250.3254.1