505 BASIC RECEIVE FUNCTIONS■ Setting a tuning stepWhen using the tuning dial to change the frequency, or whena scan function is activated, the frequency changes in incre-ments determined by the set tuning step. The tuning step isadjustable.The following tuning step are available:• 1 Hz • 10 Hz • 20 Hz • 50 Hz • 100 Hz• 500Hz • 1 kHz • 2.5 kHz • 5 kHz • 6.25 kHz• 8.33 kHz • 9 kHz • 10 kHz • 12.5 kHz • 15 kHz• 20 kHz • 25 kHz • 30 kHz • 50 kHz • 100 kHz• 125 kHz • 150 kHz • 200 kHz • 500 kHz • 1 MHz• 10 MHz • USER**When “USER” is selected, the user programmed tuning step (de-fault: 5 kHz) in “User TS” screen is selected. (p. 51)D Tuning step selectionUsing [Receiver]/[Compo] screen➥ Right-click zYx(TS) or zZx(TS) to display a tuning steplist, then select the desired tuning step.➥ Left-click zYx(TS) or zZx(TS) to set the desired tuningstep in order.• The selected tuning step is displayed in the function display.TUNINGMAINMAINSUBSUB• [Compo] screen• [Receiver] screenIC-PCR2500IC-PCR1500IC-PCR2500IC-PCR1500Tuning stepbuttonsTuning step inidicationTuning step inidicationTuning stepbuttonsTuning step listTuning step list