545 BASIC RECEIVE FUNCTIONS■ Receive mode selectionReceive modes are determined by the physical properties ofthe radio signals. The receiver has 5 receive modes: USBLSB, CW, AM, WFM and FM modes. The mode selection isstored independently in each memory channel.Additionally IC-PCR2500 has DV or P25 mode when specificoptional unit UT-118 or UT-122 is installed, respectively. TheSub band of IC-PCR2500 can select AM, FM and WFM modeonly.Typically, AM mode is used for the AM broadcast stations(0.495–1.620 MHz), air band (118–135.995 MHz), and short-wave broadcasts. WFM is used for FM broadcast stations(76–107.9 MHz).When using zAUTO-Mx (automatic mode), a receive mode,IF filter passband width, tuning step, etc., are selectedautomatically after inputting a frequency. (p. 55)Using [Receiver]/[Compo] screenClick zSSBx, zCWx, zAMx, zWFMx, zFMx or zAUTO-Mx toselect the desired receive mode.• Clicking zSSBx toggles between the USB and LSB mode.Using [Simple] screenClick zMODEx indication to display a mode list, then selectthe desired receive mode.Active band onlyActive band onlyIC-PCR2500IC-PCR1500Receive mode list Receive mode listIC-PCR1500 IC-PCR2500MAIN SUB• [Simple] screenIC-PCR2500IC-PCR1500Mode indication• [Compo] screenIC-PCR2500IC-PCR1500• [Receiver] screenMODE/VOLPANEL
