817SCAN OPERATION (Multi-function receiver/Component screens only)7■ Programmed scanProgrammed scan automatically searches for signals withina specified frequency range.For programmed scan, scan edges must be programmedin advance.D Programming scan edge channelsSet the scan edge channel name, frequency range and ATTin advance. Up to 50 settings can be programmed.qRight-click the zPROGx button to call up the [ProgramScan] setting screen if it is not displayed.wClick the [Program Scan] tab to show the program list.eInput the start frequency into the [Freq Low] cell from thekeyboard, then push [Enter].• Set other data (e.g. name, end frequency into [Freq High] or at-tenuator) if desired.Program the start frequency first, otherwise no settingcan be done except for the name.rEnter the desired scan edge channel number, then clickthe close ([X]) button to close the setting screen.D Edit menu detailsEditing the memory list with the edit menu is the same as thememory channels. See the following pages for details.• Copying a memory contents (p. 74)• Memory channel insert/delete (p. 75)• Memory channel up/down (p. 75)• Clearing from the memory list (p. 77)METER/SCANActive band onlyMAIN SUB• [Compo] screen• [Receiver] screenIC-PCR2500IC-PCR1500IC-PCR2500IC-PCR1500zPROGxzPROGx• [Program Scan] screenEdit menuq Click e Clickw Input the start frequency first,then set other data.Click zMENUx, and point to [Pro-gram Scan Edge]. Then, selectthe desired item from the list.Import :Export :Import the CSV file.Export the CSV file.