12013 DIGITAL MODE OPERATION (IC-PCR2500 Main band only)■ DV digital squelch functionWhile in DV mode operation, the digital call sign (DSQL) ordigital code squelch opens only when receiving a voice signalwith the same pre-programmed digital call sign or code, re-spectively.D Digital squelch settingqClick zDVx to select DV mode.wClick zDSQLx to turn the digital squelch ON.• “DSQL” (or “CSQL”) appears in the function display.eRight-click zDSQLx to display the [DV Digital SQL] settingscreen.rCheck the [DSQL] (or [CSQL]) check box to select the de-sired squelch type.tEdit the specific call sign for DSQL (or desired code forCSQL).• 0 to 99 code are available for CSQL.yCheck the [Pocket Beep] check box to turn the pocketbeep function ON, if desired.• “ ” appears in the function display.uClick the close button ([X]) to close the [DV Digital SQL]setting screen.iWhen the received signal includes a matched call sign (orcode), squelch opens and the signal can be heard.• When the received signal’s call sign (or code) is not matched,digital squelch does not open, however, the S-indicator showssignal strength.oClick zDSQLx again to cancel the digital squelch.• “DSQL” (or “CSQL”) disappears.MODE/VOL PANELIndicatorsMain band onlyMain band onlyzDSQLxzDSQLx• [Compo] screen• [Receiver] screenDualwatchSingle bandDualwatchSingle band• [DV Digital SQL] screenDigital call sign squelch Digital code squelchr Click r ClickqeDigital call sign squelch indicatorDigital code squelch indicatoreClick to select thesquelch type.w Enter the call sign. w Enter the digital code.q Click to select thesquelch type.Check the check boxto turn the [PocketBeep] ON.Check the check boxto turn the [PocketBeep] ON.