Icom IC-PCR1500 Instruction Manual

Also see for IC-PCR1500: Service manual Service manual Instruction manual

Contents

485 BASIC RECEIVE FUNCTIONS■ Setting a frequencyDepending on the situation, the receive frequency can be setusing the following methods. Frequencies can be set from0.010 to 3299.9999 MHz.D Using the PC keyboard➥ Enter the desired frequency using the 10-keypad on thePC keyboard, then push [Enter] to set the frequency.• When inputting from the keyboard, click anywhere in the receiverscreen first, then begin inputting the frequency.• If you make a mistake while inputting a frequency, click [CE] onthe receiver screen to clear the input and return to the previousfrequency.• When you want to change the 100 kHz digit and below, push [•]first, then the 10-keypad and then [Enter].• When you want to set the 100 kHz digit and below to 0, input theMHz digits and then push [Enter].• When inputting a frequency outside of the allowed receive fre-quency range, the previously selected frequency is automaticallyselected after clicking [Enter].D Using the tuning dial➥ Click zDIALx to set the receive frequency with the selectedtuning step.• Right-click to increase the frequency.• Left-click to decrease the frequency.• When clicking and holding zDIALx, the frequency scrolls up ordown.• The frequency changes according to the preset tuning steps. Seepgs. 50 and 51 for selecting the tuning step.D Using the 10-keypadUsing [Receiver]/[Compo] screen➥ Click the desired 10-keypad, then click zENTx to set thefrequency.• If you make a mistake while inputting a frequency, click zCEx toclear the input and return to the previous frequency.• When you want to change the 100 kHz digit and below, click z•xfirst, then the 10-keypad and then zENTx.• When you want to set the 100 kHz digit and below to 0, input theMHz digits and then click zENTx.• When inputting a frequency outside of the allowed receive fre-quency range, the previously selected frequency is automaticallyselected after clicking zENTx.