Icom IC-R2500 Instruction Manual

Also see for IC-R2500: Price list Service manual Instruction manual

Icom IC-R2500 Instruction Manual Manual pdf 36 page image

5 MEMORY OPERATION29Contents of programmed memories can be cleared (erased),if desired.q Push [VFO/MR•S.MW] to select VFO mode in the mainband.w Push the same band’s [VFO/MR•S.MW] for 1 sec. to enterselect memory write mode.• “!” indicator and the memory channel number blink.e Rotate the same band’s [DIAL] to select the memorychannel to be cleared.• Memory channels not yet programmed are blank.r Push [SET•SKIP] three times to select “CLEAR,” thenpush and hold [VFO/MR•S.MW] for 1 sec.• 3 beeps sound.• The cleared channel display changes to blank.• “!” and the memory channel number blink continuously.t Push the same band’s [MAIN] or [MHz•TS] to exit selectmemory write mode, or repeat steps e and r to clear an-other channel.y Push the same band’s [VFO/MR•S.MW] to return to VFOmode.☞NOTE: Be careful!— the contents of cleared memoriesCANNOT be recalled.[EXAMPLE]: Clearing memory channel 20.Push to select VFO. Rotate for selecting memory channel.Push for 1 sec.S.MWVFO/MR S.MWVFO/MRS.MWVFO/MRPush any switch for main bandother than , then push to return to VFO.S.MWVFO/MR S.MWVFO/MRPush three times, then push for 1 sec.SETSKIPBeepBeepBeep■ Memory clearing