Icom IC-R2500 Instruction Manual

Also see for IC-R2500: Price list Service manual Instruction manual

Icom IC-R2500 Instruction Manual Manual pdf 50 page image

43DIGITAL MODE OPERATION9■ Digital mode operationThe IC-R2500 can operate in DV* 1 mode or P25* 2 modewhen the optional UT-118 or UT-122 is installed.*1: The optional UT-118 is required.*2: The optional UT-122 is required.Some versions come with the UT-122 installed.q Select the left band as the main band.➥ Push [MAIN•AGC] once to select left band, if necessary.w Set the operating frequency in digital mode.e Push [MODE•SCAN] to enter receive mode select mode.r Rotate left band’s [DIAL] to select the desired digital mode.tPush any key to exit receive mode select mode.■ Pocket beep operationThis function uses digital code/call sign for calling and can beused as a “common pager” to inform you that someone hascalled while you were away from the receiver. The digitalcode or digital call sign squelch does not function during low-speed data communication in DV mode.D Waiting for a call from a specific stationq Select the left band as the main band.➥ Push [MAIN•AGC] once to select left band, if necessary.w Set the operating frequency in DV (P25) mode.e Program the digital code or call sign in set mode.➥ Push [SET•SKIP ] to enter set mode.➥ Push [SET•SKIP] or [ATT•PRIO] several times until“OPt” appears, then rotate left band’s [DIAL] to select“On.”➥ Push [SET•SKIP ] or [ATT•PRIO] several times until de-sired item appears.• “CAL” when programming the calls sign for the digital call signsquelch in DV mode.• “dCd” when programming the digital code squelch in DVmode.• “nA” when programming the NAC code for the digital NACsquelch in P25 mode.• “t1” and “U1” when programming the TGID and Unit ID for thedigital selective squelch.[ATT•PRIO][SET•SKIP][DIAL][MAIN•AGC][MODE•SCAN]UT-118 or UT-122’s installation is described in the IC-PCR2500’s Instruction manual. See the installation details.